By Shumail Ahmed, Director of Wise DTF Prints Ltd, Putney, London. I print DTF transfers for UK brands and print shops every working day and test every batch on our own press. About Wise DTF Prints.
The builder shows a warning when a design is being printed larger than its pixels can support. You can still order, but the print will be softer than it should be. This is what the warning is telling you and how to fix it.
The maths
DTF prints at 300 dots per inch. Divide the pixel width of your image by 118 and you get the largest width in centimetres it will print sharp. A 1200 pixel wide logo is sharp up to about 10cm; a 600 pixel social media logo is only sharp to 5cm. Below about 150 DPI, which is half that size again, the warning appears.
Fix 1: make the print smaller
Type a smaller size in the width box until the warning clears. For a left-chest logo this is often all you need.
Fix 2: get the original file
Ask whoever made the logo for the original AI, SVG, PDF or a large PNG. A vector file prints sharp at any size. Most designers keep them.
Fix 3: upscale
AI upscalers can double or quadruple a logo’s pixels with decent results on simple shapes and text. Check the edges at full zoom afterwards; upscalers sometimes invent detail.
Fix 4: redraw
A simple text logo is quicker to redraw than to repair. Our file setup service covers clean-ups; redrawing as vector is quoted separately.
What not to do
Do not screenshot a website or a WhatsApp image and upload it. Screenshots are 72 DPI and will always trigger the warning. The artwork guidelines list the pixel sizes you need for each sheet.
All of these guides use the free builder on our DTF gang sheet builder page. Sheets are printed in Putney, London and dispatched the same working day when you order before 1pm. The full series is listed under guides.

