By Shumail Ahmed, Director of Wise DTF Prints Ltd, Putney, London. I print DTF transfers for UK brands and print shops every working day and test every batch on our own press. About Wise DTF Prints.
Nothing looks worse than a 22cm logo on a kids’ tee or a 15cm print lost on an adult hoodie. Here is how to decide on a size and then get it printed at exactly that size.
Measure the garment first
Lay the garment flat and measure the area you want to cover. Standard guides: left chest 7 to 9cm wide; adult front 25 to 28cm wide; adult full back 28 to 35cm wide; kids’ front 15 to 20cm; toddler 10 to 12cm. Hoodie fronts stop above the pouch pocket, which usually means 20 to 25cm wide.
Method 1: the builder’s size boxes
- Upload your design in the gang sheet builder.
- Click the design on the sheet and type the width in centimetres. The height follows to keep the proportions.
- Add other designs or copies, then order. The printed size matches the box to within a millimetre.
Method 2: small transfers at a set size
For a single logo, the small DTF transfers product prints one design inside a 5, 7, 10, 15 or 20cm square from £1.49. Choose the size, upload, done.
Getting the proportions right
A design is scaled to fit the box without stretching, so a wide logo set to 10cm wide might only be 4cm tall. If you want it to fill a square, that is a change to the artwork, not the size box.
Check with paper
Print the design on a home printer at the chosen size, cut it out and lay it on the garment. It takes two minutes and avoids a wasted transfer.
All of these guides use the free builder on our DTF gang sheet builder page. Sheets are printed in Putney, London and dispatched the same working day when you order before 1pm. The full series is listed under guides.

