By Shumail Ahmed, Director of Wise DTF Prints Ltd, Putney, London. I print DTF transfers for UK brands and print shops every working day and test every batch on our own press. About Wise DTF Prints.
A squad kit is names, numbers and a crest, in different combinations for every player. On a gang sheet that is one order and one press session rather than 15 separate transfers. Here is how I set one up.
Sizes that work
- Back numbers: 20 to 25cm tall for adults, 15 to 18cm for juniors.
- Back names: 5 to 6cm tall letters, usually 25 to 30cm wide depending on the name.
- Front numbers and sleeve numbers: 8 to 10cm.
- Crest: 7 to 9cm on the left chest.
Building the sheet
- Open the 1 metre sheet in the builder. A 15-player kit with back name, back number, sleeve number and crest fits on one metre.
- Use the text tool to type each name and number. Choose a bold block font, set the height, and pick a colour that contrasts with the shirt. White or yellow on dark kits, black or navy on light ones.
- Upload the crest as a PNG and set the quantity to the number of players.
- Arrange names next to their numbers so each player’s set is in one strip, then run Auto Build on the remaining crests and sleeve numbers.
Pressing a kit
Most kits are polyester, so press at 160°C for 10 seconds with medium pressure, cold peel, then a short second press under parchment paper. Keep the press plate away from seams, collars and sponsor patches, and press the number first, then the name above it.
Common mistakes
- Thin fonts: anything under 1mm in stroke width can break during pressing. Use a block font.
- Forgetting the squad list: double-check spellings and numbers before ordering; we print exactly what is on the sheet.
- No spares: add one or two extra crests and a spare number for the inevitable mis-press.
All of these guides use the free builder on our DTF gang sheet builder page. Sheets are printed in Putney, London and dispatched the same working day when you order before 1pm. The full series is listed under guides.

